Category: Technology

  • Printed Circuit Board Diagram?

    A Printed Circuit Board, or PCB, is a board used to connect electronic components together. They are found in everything from computers to cell phones to calculators. PCBs can be simple, with only a few components, or they can be very complex, with hundreds of components. The diagram of a PCB shows how the components are connected together.

    PCB Design

    PCB design is the process of creating a printed circuit board. A PCB is made up of a series of copper tracks on a insulating board. These tracks are used to connect electronic components together. The design of a PCB is important as it determines how well the board will function.

    There are a few things to consider when designing a PCB. The first is the width of the tracks. This needs to be wide enough to carry the current from the component to the next. The second is the spacing between tracks. This needs to be small enough so that the tracks do not short out. The third is the size of the board. This needs to be large enough to fit all the components.

    Designing a PCB can be done by hand or using software. When using software, it is important to use a program that can generate a gerber file. This file can be sent to a PCB manufacturer to have the board made.

    PCB Layout

    PCB layout is the process of arranging the various components on a printed circuit board so that they function properly. This includes placing the components in the correct positions, routing the traces between them, and creating the necessary vias and pads.

    PCB layout is a critical part of the design process, as it can have a significant impact on the performance of the finished product. Poorly designed PCBs can be unreliable and difficult to manufacture, so it is important to get it right.

    When designing a PCB layout, there are a number of factors to consider, such as the size and shape of the board, the spacing between components, and the routing of the traces. The layout must also take into account the power and signal requirements of the components.

    Once the layout is complete, it must be checked for errors and potential problems. This includes ensuring that all the traces are properly connected and that there are no shorts or open circuits. The layout can then be sent to a fabrication shop for manufacturing.

    PCB Fabrication

    PCB fabrication is the process of making a printed circuit board. This can be done by etching a copperclad board, or by using a pre-made PCB. The PCB is made up of conductive tracks, which are etched onto a non-conductive substrate. The tracks are then coated with a thin layer of copper, which is then etched away to leave the desired pattern.

    PCB Assembly

    PCB Assembly is the process of soldering electronic components to a printed circuit board (PCB) to create an electronic device. The assembly process begins with a PCB design, which is created using computer-aided design (CAD) software. Once the design is complete, the PCB is sent to a fabrication plant where it is manufactured. Once the PCB is manufactured, it is sent to an assembly plant where electronic components are soldered to the board. The assembly process is completed by testing the device to ensure it is functioning properly.

    PCB Rework

    A Printed Circuit Board, or PCB, is a board used to connect electronic components together. They are typically made of a thin layer of copper or other conductive material sandwiched between two insulating layers.

    PCBs are used in a variety of electronic devices, from simple circuits to more complex ones found in computers and other digital devices. In order to function properly, each component must be properly connected to the PCB. This can be done using either through-hole or surface-mount technology.

    Through-hole technology involves passing component leads through holes in the PCB and then soldering them in place on the other side. Surface-mount technology, on the other hand, involves soldering components to pads on the surface of the PCB.

    PCB Rework is the process of modifying a PCB after it has been fabricated. This can be necessary for a variety of reasons, such as fixing errors, adding or removing components, or making changes to the design.

    Rework can be a complex and time-consuming process, so it is important to have a clear understanding of what needs to be done before starting. In some cases, it may be necessary to remove and replace entire sections of the PCB. In others, only small changes may be required.

    Once the necessary changes have been made, the PCB can then be tested to ensure that it is functioning properly.

    PCB Repair

    A printed circuit board (PCB) is a board that connects electronic components together. It is made of a special material called substrate, which is usually made of fiberglass or another type of material. The substrate has conductive pathways etched into it that connect the different components.

    PCBs are used in a variety of electronic devices, from computers and cell phones to televisions and radios. They are an essential part of how these devices work.

    When a PCB needs to be repaired, it is usually because one of the components has failed. The first step is to identify the failed component. This can be done by using a multimeter to test the continuity of the different pathways. Once the failed component is identified, it can be replaced.

    PCB repairs can be simple or complex, depending on the nature of the problem. In some cases, only a single component needs to be replaced. In other cases, the entire board may need to be replaced.

    PCB repairs are best done by experienced professionals. However, with the right tools and instructions, they can be done by anyone.

    PCB EMC Compliance

    PCB EMC compliance is a sub section of the main topic, printed circuit board diagram. This compliance involves making sure that the PCB design meets the requirements for electromagnetic compatibility. There are many factors that go into ensuring PCB EMC compliance, such as the material used for the PCB, the layout of the PCB, and the way the PCB is manufactured.

    PCB EMC Testing

    EMC testing is a process of testing a printed circuit board (PCB) to ensure that it meets the requirements for electromagnetic compatibility (EMC). The goal of EMC testing is to ensure that the PCB does not emit electromagnetic interference (EMI) that can interfere with the operation of other electronic devices. EMC testing is typically done by measuring the emissions of the PCB with an electromagnetic compatibility (EMC) test receiver. The emissions of the PCB are then compared to the emissions limits for the intended environment in which the PCB will be used. If the emissions of the PCB exceed the emissions limits, the PCB must be redesigned to reduce the emissions.

    PCB Design Software

    There are many different software packages available for designing printed circuit boards (PCBs), and the choice of which to use can be quite overwhelming for someone just starting out. Some packages are free, while others cost hundreds or even thousands of dollars. Some are very simple and easy to use, while others are much more complex and require a significant learning curve.

    The most important thing to consider when choosing a PCB design software package is what level of complexity you need. If you are just designing simple boards with a few components, then a free or low-cost package may be all you need. If you are planning on designing more complex boards with a large number of components, then you will need a more powerful and expensive package.

    Once you have decided on the level of complexity you need, you can then start looking at specific software packages. There are many reviews and comparisons of different PCB design software packages available online, so you should be able to find one that meets your needs.

  • Ultra-thin ceramic core disposable ZOVOO DRGABAR Z700 GT shocked the UK market

    ZOVOO launched a new product, DRAGBAR Z700 GT, in the UK market. It is a disposable with delicate and light appearance. Equipped with GENE TREE Special Edition, it is a future ceramic core product that subverts the industry and defines a new pattern of ceramic core vaping.

    Low Consumption, up to 700 Puffs

    Ultra-thin DRAGBAR Z700 GT brings exceptional power efficiency and up to 700 puffs. It is the new peak of puffs in 2ml disposable products on the market, enjoying a more stable and lasting vaping experience.

    GENE TREE Special Edition inside accomplishes a total transcendence in efficiency conversion, including its super low power, super low battery consumption, more puffs, so that achieves higher energy conversion efficiency and upgraded experiences in full range as well.

    Ultra Slim Design, exquisite fashion

    As the first ultra-thin disposable vape with ceramic core technology, DRAGBAR Z700 GT is 9mm thin and weighs a mere 20 grams. It is the feather-light vape you can easily carry in your pocket.

    The clean lines make DRAGBAR Z700 GT look more trendy and sleek, and the flat body design creates excellent grip. It’s a prime example of artistic industrial design. DRAGBAR Z700 GT combines the fashion appearance and portability, allowing you to have an unique vaping experience anytime, anywhere.

    Powder and Pollution Free

    DRAGBAR Z700 GT is supercharged by GENE TREE Special Edition independently developed by ZOVOO. “Powder free” pioneer patented technology adopted, upgraded GENE TREE breaks the bottleneck of sticking and dropping powder in the traditional ceramic core, realizing real powder free puff experience and truly enjoying the purity of every puff, so that users can start a more pleasant and healthy vaping journey.

    Upgraded GENE TREE Special Edition, creating ultra-fine taste

    DRAGBAR Z700 GT deeply integrates technology and taste. Compared with traditional vaping coils, GENE TREE Special Edition produces small-size aerosol particulate below normal size. Thus, DRAGBAR Z700 GT comes with an ultra-fine vapor and silky taste. The smoothness is enhanced by 40% if compared with similar products on the market.

    In addition, new upgraded ceramic core brings more stable vaping, and the consistency of taste is enhanced by 60%. Taste is more outstanding without decay.

    Something unique, more fantastic

    The ceramic core of DRAGBAR Z700 GT adopts multilayer microhole structure, ensuring strong e-liquid transportation and sealing. It not only brings mute vaping to users, but also solves the pain points that affect users’ taste and use experience.

    Up to 100 rich flavors to meet different users’ taste preferences, while enriching vaping experience with colorful appearance.

    Who is ZOVOO? ZOVOO, as a brand-new prefilled vape brand, was highly appraised by the industry as soon as it was launched on 2020. So far, it has a complete product line that covers the user’s using scenarios. ZOVOO takes affinity and vitality as the main tone of the brand, focusing on the needs of urban fashion users. Currently, ZOVOO’s products are sold in more than 70 countries and regions in North America, Europe and Asia. ZOVOO will pursue long-term value and strengthen exchanges and cooperation in technology, brand, and supply chain, and promote the innovation and development of the vape industry. For more information, please visit https://www.izovoo.com/ and follow ZOVOO on Instagram, Facebook and Tiktok.

  • VOOPOO Unveiled Its New Member of ARGUS Series, Solidarity and Big Eruption Refresh Your Impression

    AUGUST 15th, VOOPOO released two new mod products of ARGUS series, ARGUS MT and ARGUS XT, besides the solidarity that they inherit from the ARGUS MOD FAMILY, they also impress you with their innovation and professional vaping experience.

    Solid As ARGUS, Outdoor Essentials

    Inheriting the solid feature of ARGUS MOD FAMILY, ARGUS MT and ARGUS XT are equipped the advanced IP68 tri-proof certification, waterproof, dust-proof, and drop-proof. ARGUS XT and ARGUS MT are your loyal accompanies fearless of any extreme environment or scenario. The holeless appearance design of the device gives you the perfect protection from the dust and water. The equipped hanging ring not only decorates your outfit but provides another protection for your device in outdoor activities.

    Innovative Designs, Erupting Vaping Experience

    ARGUS MT and ARGUS XT are ingeniously designed with volcano crater structure, MAAT TANK NEW, for leakage proof and airflow improvement. The unique volcano crater structure drains the condensate down and isolate it at the bottom. Avoid the condensate infiltrating into the mod. Meanwhile, the two-way airflow gives you an easy deep DL vaping by reducing 60% airflow loss.

    ARGUS XT and ARGUS MT bring 100W max power and the constant output. Compatible with one 18650 battery or 21700 battery, ARGUS XT matches the max power to 100W. ARGUS MT, with 3000mAh build-in battery, support the long day vaping demand.

    Here are several humanized designs in ARGUS MT and ARGUS XT, the fire button and the function button are distributed separately, which avoids accidental activation. The lanyard ring hole design frees your hands, especially when you are in outdoor situations. In addition, they have QS LOCK to reduce the burnout of coils due to accidental touches and prolong the lifespan of coils.

    Upgraded Tech, Strong Support

    ARGUS MT is compatible with the new TPP atomizer, MAAT TANK NEW, which was launched in March. Its airway structure and leakage-proof performance are greatly improved. The updated TPP-DM2 coils and TPP-DM3 coils in the kit, bring fuller, more delicate, and multi-layered clouds. Meanwhile, the technique prolongs the life span of coils while optimizing the working temperature.

    In terms of device chip, the latest intelligence chip applied in mod system, GENE.TT 2.0, could switch matching powers automatically to support users with 4 vaping modes such as Smart，RBA, TC and Turbo. The upgraded Turbo mode realize a 12% wattage increase at the first second of fire and 25% enhancement of vaping eruption.

    ARGUS MT is equipped with the Battery Management System (BMS) monitoring the real-time temperature of the built-in 3000mAh battery. ARGUS XT uses a system which intelligently identifies the battery and matches the optimal output wattage.

    About VOOPOO

    Website: https://www.voopoo.com/

    Instagram: https://www.instagram.com/voopootech_official/

    Facebook: https://www.facebook.com/voopooglobal

    YouTube: https://www.youtube.com/c/VOOPOO

    Tiktok: https://www.tiktok.com/@voopoofans

    Shop：https://shop.voopoo.com/

  • 5 Ways to Raise Productivity in Your Executive Search Software Company

    Executive search software is designed to make it fast, easy and affordable for companies to find their next leader. When you work with an executive search software provider, you have access to a community of recruiters who specialize in talent acquisition. Their network of experts allows you to connect with the right fit at the right time. Headhunting software can be a great tool but that doesn’t mean your team should just use it as a convenient crutch. Without clear actionable steps, your company may just suffer from slower productivity and low morale instead of managing its recruitment needs effectively. Here are 5 tips on how to increase productivity in your company so that your executive search software is not just effective but also efficient.

    Start with the Basics

    The most important step you can take to increase productivity is to start with the basics. No matter how much effort you put into increased productivity, if you don’t have a solid foundation, you’ll never be able to achieve significant results. Before hiring a new talent acquisition consultant or implementing any new tools, you need to make sure the most critical issues in your company are in order. 

    – Do you have the right team in place to recruit? 

    – Do you have clear hiring strategies and metrics? 

    – Do you have a process in place to make hiring decisions? 

    – Are you comfortable with your hiring costs and efficiency?

    Set Objectives for New Hires

    When hiring a new talent acquisition consultant for your company, it’s important to have clear objectives for every hire. As your company grows, it’s likely that you’ll want to hire more people in a more timely manner. However, without a clear objective, it might be hard to determine how much you need to grow. A great way to set objectives is to prioritize your company’s needs and add a percentage that you’d like to meet. For example, your company just hired a new VP of Sales. In order to be more competitive, you want to increase your sales by 20% over the next 12 months. With this information, you can set a clear objective for your new hire.

    Train Your Employees

    One of the best ways to boost your team’s productivity is to have your executives and employees attend training sessions. Depending on your industry and the type of company you work for, training might help your company become more efficient or help you better manage the workforce. 

    There are numerous benefits to having your team go through training. 

    – Training improves employee retention, which leads to higher retention rates and lower training costs. 

    – Training boosts morale and team unity, which can lead to a more productive team environment.

     – Training can help employees become better at their jobs and feel more confident in their abilities. 

    – Training can help you identify areas where you can improve your performance and approach to business. 

    – Training can help you better understand your clients and how best to serve their needs.

    Measure, Track, and Improver

    Once you’ve identified areas where you need improvement, the next step is to track those metrics and improve. This can be hard in a company because it can be incredibly distracting and difficult to measure every aspect of a business. 

    – Start tracking basic metrics in areas where you’d like to improve. 

    – Then, identify areas where you can make improvements and set goals for those as well. 

    – Track your progress and make adjustments as needed.

    Don’t Be Afraid to Cut Losses

    As your company grows, it’s inevitable that you’ll experience some failures. At some point, you’ll have to decide if those failures are worth keeping in the company’s history or if you should cut losses and get rid of them. This can be difficult because it’s tempting to keep on-goings simply because they’re working. Make sure to cut losses in areas where you know you’re unsuccessful so that you can free up the time, energy, and resources needed to make more successful hires in other areas.

    Bottom Line

    Over time, business growth will lead to a demand for more hires. When this occurs, your existing team might find it challenging to manage the increased workload. If this happens in your company, you might want to consider implementing some of these productivity tips. Executives and employees can benefit from training sessions that help them become more efficient at their jobs. You can also use Recruiterflow to help you find talent acquisition consultants who work in your area.

  • GEM, a Leading Green Enterprise in China, will land on the Swiss Exchange

    GEM (stock code: 002340), a company listed on the Shenzhen Stock Exchange, announced that on June 22, 2022, that the China Securities Regulatory Commission (CSRC) gave its approval for the company to issue global depository receipts (GDR) and to be listed on the Swiss Exchange (SIX). On July 20, 2022, SIX approved GEM to issue GDR and to be listed on the SIX. So far, the path of GEM issuing GDR and going public on the SIX have been unimpeded.

    Landing on the Swiss stock exchange, investing in overseas green projects, and serving the European new energy industry

    As early as April 30, 2022, GEM announced that the company plan to issue GDR and to be listed on the SIX, which would be used to support their European power battery recycling and power battery material manufacturing projects, the development and operation of overseas nickel resource projects, to promote the company’s international expansion, strengthen international financing channels, and further enhance its global brand influence.

    In May 2022, GEM and the Hungarian Consulate General in Shanghai signed an “MOU for Cooperation on Production of High-nickel Precursors for New Energy Vehicles and Recycling of Scrap Power Batteries.” This MOU concerns investment in the production of high-nickel precursors for new energy vehicles and the recycling of end-of-life power batteries, based on the principles of cooperation, mutual trust and ESG value investment. GEM plans to build a Europe-leading, world-standard new energy circular economy industrial base in Hungary which meets the requirements of the EU’s new energy industry development for the localization of material manufacturing, and to meet the implementation requirements of the EU’s new battery laws.

    An important investment project for the global depository receipt (GDR) issued by GEM and listed on the Swiss Stock Exchange is GEM’s Indonesia Nickel Resources Project. The project is designed to produce 50,000 metal tonnes of nickel intermediaries and 4,000 metal tonnes of cobalt per year from laterite nickel ore, meeting the nickel resource demand of ternary power battery manufacturing. The project adopts green design technology by using low-grade laterite nickel ore (containing 0.8-1.2% nickel) and high-pressure leaching technology (HPAL), which are not currently used in pyrometallurgy. The first phase of the project (with a capacity of 30,000 tons of nickel metal) has been completed. 

    According to Frost & Sullivan’s latest Report, by 2030, the global new energy industry will increase usage of nickel resources by 3 million tonnes, almost more than twice the current total exploitation of global nickel resources. This will result in a shortage of global nickel resources over the next 10 years and keep nickel prices high.

    Therefore, the Indonesian nickel resources project led by GEM is strategically forward-looking and will produce solid economic benefits. According to its public release, the project is expected to add RMB 5.36 billion yuan of sales and 1.06 billion yuan of profit every year once it is completed.

    Figure 2 Construction site of GEM’s Indonesia project

    Exploring Environmental, Social, & Governance (ESG) practices, revenue increasing by nearly 34 times, and achieving a green and beautiful legend

    GEM, headquartered in Shenzhen, China, was named some 20 years ago “Green-Eco-Manufacture” by Dr. Xu Kaihua, a professor at a Chinese university. GEM was the first in China to propose a green concept of “limited resources, unlimited recycling”. The concept is of a low-carbon recycling industry, with the ideal of resolving the dual contradiction between environmental pollution and resource shortages by exploiting urban mines and developing new energy materials, and thus also leading to global greenhouse gas emission reduction.

    Over the past 20 years, GEM has continuously explored the green development model of “exploiting urban mines + new energy materials”, built an urban mines system centered on Chinese cities, and strived to achieve “Recycling for future!”. The company started from recycling mobile phone batteries and nickel, cobalt and tungsten resources, to recycling electronic waste and end-of-life vehicles, to recycling waste power batteries and cascade utilization and remanufacturing of power batteries, and then to manufacturing ternary power batteries and 3C batteries,. 16 recycling industry factories have been built in 11 provinces and cities in China, and a recycling cooperation relationship has been established with nearly 500 million people in China, with a green footprint covering 9 million square kilometers. Over the past 10 years, the cumulative recycling and disposal of waste by GEM has exceeded 32 million tons. The total amount of scrapped home appliances recovered and processed by GEM is more than 75 million units, accounting for more than 10% of the total amount of scrap in China. The total amount of cobalt resources recovered exceeds 30,000 tons, which exceeds 200% of the original cobalt mining in China and accounts for 20% of global cobalt resource recovery. The total amount of nickel resource recovered exceeds 60,000 tons, accounting for 8% of China’s primary nickel mining volume. The total recovery of tungsten resource exceeds 30,000 tons, accounting for 5% of China’s original tungsten mining volume. GEM has reduced carbon emissions by more than 2 million tons for the world, planted more than 6,000 mu of trees, saved more than 3 million barrels of oil, reduced deforestation by 3,000 hectares, and reduced soil pollution by more than 20,000 square kilometers. GEM has built a set of world-leading power battery recycling bases in China, with annual waste batteries recycling accounting for about 10% of China’s total. GEM has also built power battery recycling plants in South Korea and Indonesia, and established recycling cooperation with more than 500 battery plants and car factories in the world. The recycled ternary “core” materials are equipped on 15% of the world’s ternary battery new energy vehicles.

    Figure 3 Green disposal line for electronic waste at GEM
    Figure 4 GEM’s green disassembly line for scrapped cars
    Figure 5 Production line for GEM power battery ternary precursor

    GEM’s circular economy industrial practices have also been widely recognized around the world. It has built a green supply chain relationship with many world-renowned enterprises. GEM has won the “Global Circular Economy Multinational Corporation Award” in Davos in 2018 and the “Paulson Sustainable Development Award” in 2020.  

    In 2021, with the gradual release of the company’s production capacity, and significant increase in operating efficiency, GEM’s operating revenue reached 19.301 billion RMB, up 54.83% YOY; net profit was 923 million RMB, up 123.82% YOY. Since being listed in 2010, GEM has continued to achieve rapid growth and soaring performance. Its operating income grew by nearly 34 times, net profit by nearly 11 times, net assets by more than 13 times.

    Figure 6 Operating income, net profit and net assets over the past decade

    Taking the high-speed rail of green development, the future performance of high growth can be expected

    With the rapid development of global new energy resources, new energy vehicles are quickly replacing internal combustion vehicles. By 2026, the global sales of new energy vehicles will exceed more than 20 million units. Therefore, power batteries and battery materials will feed a huge emerging market.

    Over the next five years, the dual-track green strategy of “mining urban mines + developing new energy materials” will seize the once-in-a-century rapid development of new energy and the peak of China’s waste scrap, stride on the high-growth development channel, and create good investment value for global investors. For 2026, GEM sales revenues will strive to exceed 80 billion Yuan, with reduced carbon dioxide emissions of 1 million tons. This will result in an upgrade from “turning waste into treasure” to “turning waste into a carbon sink,” breaking through the green value upgrading of the company from selling renewable resources to selling “carbon sinks”, thus creating the world’s leading enterprise group in green development!

    Figure 7 GEM’s future “zero carbon” industrial park

  • ZOVOO unveils GENE TREE Special Edition ceramic core, leading the advancement of electronic atomization technology

    On June 29 local time, ZOVOO unveiled new Nano-Tech Ceramic Core at its global online launch event. The independently developed innovative technology was named “GENE TREE Special Edition”.

    At present, ceramic core technology has become a key indicator to measure the advancement of the technical level of a company in the field of electronic atomization. ZOVOO GENE TREE Special Edition is dedicated to becoming a leader in atomization technology through nano-microcrystalline materials and technological innovation, providing users with a natural and pleasant vaping experience.

    Let’s take a look at the technological advantages of this revolutionary innovation compared with previous ceramic cores:

    Powder-free Technology, Pure Vaping

    As industry’s first “powder-free” ceramic core proprietary patented technology, GENE TREE Special Edition breaks the bottleneck of sticking and dropping powder in the traditional ceramic core, realizing real powder free puff experience and truly enjoying the purity of every puff.

    Under 25 times microscope, compared with competitors, GENE TREE ceramic core has no surface powder, and meanwhile, the high intensity ceramic formed in 1,300°C temperature guarantees the powder-free effects, protecting users’ health.

    First to Adopt Multilayer Microhole Structure

    ZOVOO R&D team developed the industry’s first Multilayer Microhole Structure by ceramic materials grading. GENE TREE Special Edition ensures strong e-liquid control, while providing users with mute vaping. It solves the pain points that users are most concerned about, such as frying oil, poor stability, low service life, oil leakage and other problems that seriously affect the taste and use experience.

    No decay in taste, more outstanding flavor

    Proper Multilayer Microhole Structure for higher balance between best tobacco substitute and delicate mouthfeel.

    GENE TREE Special Edition offers the superb substitute mouthfeel. Compared with  other ceramic coil of competitors in the market , it increases the overall substitution by 26%, and increases the consistency of taste by 60%. GENE TREE Special Edition vaping aerosol has a stable release, 3.8% overall attenuation, compared to 10% for competitors, realizing full of experiences without attenuation, and consistent vaping experience from each puff.

    Compared with similar products, GENE TREE Special Edition increases the fullness of cloud by 36%, and increases the fineness of cloud by 14%. The taste is more attractive, bringing you a delicate, smooth and super restored taste.

    Low consumption, high efficiency

    In addition, with higher energy conversion efficiency, GENE TREE Special Edition accomplishes a total transcendence, including its super low power, super low battery consumption, more puffs, so that achieves higher energy conversion efficiency and upgraded experiences in full range as well.

    This is ZOVOO newly upgraded Nano-microcrystalline ceramic core, GENE TREE Special Edition, gives disposable products a new experience of pure inhalation, mute and non-scalding, smooth and delicate, and super-substitute. While breaking through technical barriers and deepening technological innovation, ZOVOO also released a new disposable product equipped with this technology, DRAGBAR Z700 GT, which opens a new era of ultra-thin ceramic cores and reconstructs a new lightweight experience.

    ZOVOO team is persistent in improving core competence and user-focused. It was highly praised by the industry once it was listed at the end of 2021. Now ZOVOO is globally recognized and accepted, becoming favored by consumers.

    ZOVOO will continue to invest in innovative technology research and development, taking scientific and technological innovation and rebuilding the healthy ecology of electronic atomization industry as the goal of brand development. ZOVOO is expected to bring more surprises to global users and refresh the market pattern of electronic atomization industry in the future.

    Who is ZOVOO?

    ZOVOO, as a brand-new prefilled vape brand, was highly appraised by the industry as soon as it was launched at the end of 2021. So far, it has a complete product line that covers the user’s using scenarios. ZOVOO takes affinity and vitality as the main tone of the brand, focusing on the needs of urban fashion users. Currently, ZOVOO’s products are sold in more than 70 countries and regions in North America, Europe and Asia. ZOVOO will pursue long-term value and strengthen exchanges and cooperation in technology, brand, and supply chain, and promote the innovation and development of the vape industry. For more information, please visit https://www.izovoo.com/, and follow our Instagram, Facebook and TikTok.

    Media contact: fiona.fan@voopootech.com

    Business contact: sales@voopoo.com

    Warning: This product may be used in conjunction with e-liquids containing nicotine. Nicotine is an addictive chemical.

  • ZOVOO DRAGBAR disposable vape POWERED BY VOOPOO to hit Bestway UK

    ZOVOO, the Best Newcomer brand in the vaping industry, will launch its star disposable series DRAGBAR in the UK wholesaler Bestway this month. This Launch serves not only as yet another example of the strength of the ZOVOO brand and its products within the UK, but also serves as a reminder of the high praise ZOVOO receives from its end consumers.

    Established in 1976, Bestway Wholesale has grown to become the UK’s largest independent food and drink wholesaler. The wholesale division has 65 large depots and more than 125000 supply partners for independent retailers and caterers.

    The entry into Bestway convenience channel enables ZOVOO to fully carry out its large-scale sales network plans, utilizing Bestway’s online and offline retail channels, comprehensive logistics advantages, leading localized customer service and high customer purchasing power, enabling more local consumers to buy DRAGBAR disposable products. Access to more comprehensive and convenient channels will further stimulate the market power of ZOVOO.

    Consumers can buy 10 flavours of DRAGBAR at Bestway, they are Lush Ice, Tobacco, Grape Ice, Mango Ice, Orange Mango Guava, Banana Ice, Strawberry Ice, Peach Ice, Menthol and Green Apple Ice.

    DRAGBAR is made by ZOVOO, the sister brand of the highly successful and incredibly popular VOOPOO brand. This disposable is powered using the same cutting-edge technology that has made VOOPOO one of the top vaping brands in UK.

    DRAGBAR is the star product series of ZOVOO, which has been enjoyed and loved by users around the world since its launch. ZOVOO team always insists on deeply exploring the needs of local users, innovating and exploring in product design, constantly optimizing product details, developing richer flavours, and thus ensuring first-class taste in their products. This is why DRAGBAR has attracted a growing number of fans in the UK, North America, Europe and other regions.

    ZOVOO will adhere to the business philosophy of “user-focus”, continue to make breakthroughs and innovations in technology, go all out to expand the market, and provide consumers with more diversified product choices, as well as safer and more pleasant vaping experience. Look forward to seeing ZOVOO products in more market channels in the future!

    Who is ZOVOO?

    ZOVOO, as a brand-new prefilled vape brand, was highly appraised by the industry as soon as it was launched at the end of 2021. So far, it has a complete product line that covers the user’s using scenarios. ZOVOO takes affinity and vitality as the main tone of the brand, focusing on the needs of urban fashion users. Currently, ZOVOO’s products are sold in more than 70 countries and regions in North America, Europe and Asia. ZOVOO will pursue long-term value and strengthen exchanges and cooperation in technology, brand, and supply chain, and promote the innovation and development of the vape industry. For more information, please visit https://www.izovoo.com/, and follow our Instagram, Facebook and TikTok.

    Media contact: fiona.fan@voopootech.com

    Business contact: sales@voopoo.com

    Warning: This product may be used in conjunction with e-liquids containing nicotine. Nicotine is an addictive chemical.

  • Reaching new heights, VOOPOO won 3 awards at the SEVENTH ANNUAL VAPOUROUND AWARDS

    On May 27th, Birmingham time, the 7th awards ceremony held by Vapouround, an authoritative media organization for electronic atomization, was held in a grand manner at The National Conference Centre in Birmingham, UK. VOOPOO, the leading brand in the electronic atomization industry, has once again been highly recognized by the organizers and many users, and its products have won three awards, Best Pod System, Best Mod, and Best Manufacture.

    Stand out from the fierce competition and recognized by the industry

    The seventh edition of the Vapouround Awards ceremony is scheduled for the evening of The Vaper Expo UK, a reopening grand conference after a two-year hiatus. It is understood that this exhibition attracted more than 1,000 electronic atomization brand owners from all over the world to participate, and more than 100,000 professional visitors came to visit. In the context of the grand exhibition, the winners of the annual Vapouround Awards, which are of great interest to the industry and smoke enthusiasts, were also unveiled.

    Vapouround magazine is one of the most authoritative and influential media in the global electronic atomization industry. The “Vapouround Annual Awards” founded by Vapouround began in 2015 and is the world’s most recognized and prestigious ceremony in the e-cigarette industry, as well as a stage for the world’s leading players to compete it has always been known as the “Oscar in the field of electronic atomization” and is deeply valued by the industry and brand owners.

    A total of 27 awards were set up this year, with nearly 700 products and brands participating, and thousands of people from Vapouround, media journalists, distributors and consumers participated in the voting, and the competition was very fierce. With its excellent product strength, strong brand awareness and user support, VOOPOO in addition to Best Manufacture, its Argus GT II Best Mod won first place and Drag Nano 2 was selected as the Best Pod System.

    Strong product strength, occupying a high position in the industry

    ARGUS GT II, has been highly praised by the judges for its excellent design, surging smoke volume, extreme sense of taste, perfect three-proof process and 200W high power constant voltage stable output, as the flagship product of VOOPOO this year, it is a well-deserved honor to receive this award. As a strategic product of VOOPOO last year, Drag Nano 2‘s product team made many innovations in oil locking technology, design, and endurance, allowing it to stand out in the highly competitive Pod category and finally achieve the great place.

    VOOPOO CEO EVEREST said that in the future, the VOOPOO team will also increase investment in research and development, create more atomized products that consider the use experience, technological innovation, and high taste, continuously improve the high-end brand position in the open system, and continue to use product strength to gain the recognition of more authoritative institutions and users.

    Who is VOOPOO

    VOOPOO was established in 2017 and has rapidly risen through DRAG products, which have been widely acclaimed globally in a short period of time. VOOPOO has four major product series – ARGUS, DRAG, VINCI, and V-series. In addition, VOOPOO focuses on building two core technology, atomization platform and chip. VOOPOO will continue to develop more national markets in the future, aiming to build one of the most influential global vape brands.

    Company: shenzhen woody vapes technology co.,ltd

    Contact Person: Nical Zhang

    Email: nical.zhang@voopootech.com

    Website: https://www.voopoo.com/

    City: shenzhen

    Address: 19/F, Block A, Coolpad Building, High-tech Industrial Park (North Zone), Nanshan District, Shenzhen

  • ZOVOO won the Best New Comer of Vapouround Awards 2022

    On May 27, the Vaper Expo UK was successfully held in Birmingham. 1000+ international vaping brands attended the exhibition, with more than 100k professional visitors. The exhibition lasted for 3 days. On the second day of the exhibition, Vapouround, the world’s leading media in the electronic atomization industry, announced the Vapouround Awards 2022 winners. With its innovative and upgraded electronic atomization technology and good brand reputation, ZOVOO won the first place in the heavyweight Award – Best New Comer.

    As an Oscar in the field of electronic atomization, Vapouround Awards is the global annual award of the industry established by Vapouround Magazine, which is the most authoritative and influential media within the industry. ZOVOO won the Best New Comer of the year, which was jointly voted by Vapouround, media reporters, dealers and consumers. It was the result of a comprehensive evaluation of the brand’s global market influence, global market share, technological innovation, product end consumer praise and other important indicators. It is an authoritative certification of its excellent brand influence and diversified product layout.

    Innovative technology leads industry development

    ZOVOO’s parent company has launched a new and upgraded GENE TREE technology and product application to further improve the reduction degree of ceramic cores, increase the life-cycle of ceramic cores, and bring natural and pleasant atomization experience to users. ZOVOO disposable products will be equipped with GENE TREE ceramic technology, which will give products features such as no attenuation, large number of puffs, high reduction and more reliability. It will lead to changes in product categories in the industry and a huge improvement in user experience, which is bound to become a milestone in the development of the industry.

    Global layout, aspiring to be a brand benchmark

    As a brand-new vaping brand, ZOVOO was highly praised by the industry as soon as it was launched at the end of 2021. Its mission and responsibility is not only to build a Chinese atomization brand with technical advantages, but also to set a benchmark and reshape the ecology of the industry. In the future, ZOVOO will be driven by the value of long-term doctrine, strengthen exchanges and cooperation in technology, brand, supply chain and other fields, and boost the innovation, transformation and development of the electronic atomization industry.

    Users focus, creating a new ecology of atomization

    ZOVOO adheres to the concept of “user-focus”, continuously focuses on multi-dimensional fields such as scientific and technological innovation, brand innovation and product innovation, meets the needs of users at all levels, and continues to lead the upgrading of user experience value. ZOVOO takes “By your side” as the brand slogan, and pays more attention to the sensory experience of users in the process of use.

    The product team said that they would continue to make breakthroughs and innovations, and continuously launch more intelligent and forward-looking electronic atomization products to provide better atomization experience for users around the world!

    Who is ZOVOO?

    ZOVOO, as a brand-new prefilled vape brand, was highly appraised by the industry as soon as it was launched at the end of 2021. So far, it has a complete product line that covers the user’s using scenarios. ZOVOO takes affinity and vitality as the main tone of the brand, focusing on the needs of urban fashion users. Currently, ZOVOO’s products are sold in more than 70 countries and regions in North America, Europe and Asia. ZOVOO will pursue long-term value and strengthen exchanges and cooperation in technology, brand, and supply chain, and promote the innovation and development of the vape industry. For more information, please visit https://www.izovoo.com/, and follow our Instagram, Facebook and TikTok.

    Media contact: fiona.fan@voopootech.com

    Business contact: sales@voopoo.com

    Warning: This product may be used in conjunction with e-liquids containing nicotine. Nicotine is an addictive chemical.

  • Vaping ad appears outdoors, VOOPOO & ZOVOO have landed in the UK

    As world No Tobacco Day is approaching VOOPOO & ZOVOO have sponsored taxis appearing on the streets of the UK to encourage smokers to kick start a healthier lifestyle.

    ICCPP is the world’s leading provider of e-cigarette technology services and solutions and as part of this its VOOPOO brand has always advocated a healthier lifestyle for smokers, and its brand slogan “spark your life” has become synonymous with quitting smoking. As a strong brand with equally strong momentum the e-cigarette brand ZOVOO with “by your side” as its brand concept, offers incredibly user-friendly products to enable every user to lead a healthier life.

    The joint advertising campaign of these two e-cigarette brands, covering nearly 100 taxis in London and dozens of billboards in Birmingham and Manchester is promoting the concept of “quitting smoking” and bringing this into the forefront of the public’s mind.

    The two products appearing on outdoor billboards and taxi bodies are respectively the high-end series products Argus GT II from VOOPOO and the flagship product Dragbar600s from ZOVOO. The Newly launched device from VOOPOO, The Argus GT II, is a high end, dual external battery with a massive IP68 rating, this exciting new product will hit shelves very soon for the public to buy and experience its incredible power and crisp, smooth flavour.

    In addition, the Dragbar600 is a disposable e-cigarette that is currently selling very well for ZOVOO. With its excellent taste, it has received high praise from experts in the industry, leading vape media outlets and fans alike, fans of the product have all been saying they cannot wait to see the Dragbar600S hit their local stores so they can buy them whenever they want and as we speak the ZOVOO team has confirmed that Dragbar600 will be entering the Supermarket and Convenience channels very shortly and fans will be able to purchase them there.

    As beloved e-cigarette brands VOOPOO & ZOVOO have always paid attention to their products and their loyal fans experience of the products, they are committed to creating a healthier lifestyle for people and using their strengths to enable smokers to quit smoking for good. Through this Taxi and Billboard advertising campaign they are aiming to get closer to every customer and serve every partner, store, and consumer in an all-round way.

    Contact Person: Nical

    Email: nical.zhang@voopootech.com